Mold Inspections in Tequesta, FL

Tequesta sits between three bodies of water — the Loxahatchee River's forks, the Intracoastal, and the Atlantic at the Jupiter Inlet — with much of the village around ten feet of elevation. The Village's own flood-hazard guidance says low-lying neighborhoods are subject to considerable flood damage during extended heavy rain, and king tides run September through December, peaking in October and November. Water is not an edge condition here; it frames the whole village, and a mold inspection that ignores the exterior water picture is guessing. Instruments turn that general picture into numbers for one specific house, which is the difference between worrying about humidity and knowing where it has settled.

Two houses on the same Tequesta street can age very differently. One near Constitution Park may take wind-driven rain on a gable end, while a similar home in Rolling Hills holds water at a window sill nobody checks. Sterling works through Palm Beach County homes room by room with a moisture meter, a hygrometer, and a thermal camera, pays extra attention to the air handler closet and the wall behind it, and photographs every reading where it was taken. You end up with a record of what was wet, what was dry, and what deserves a second look.